Air piping filter
(1)Filter efficiency is determined in accordance with CAGI standard ADF400, its calculation basis is 38ºC inlet air temperature.
(2)Filter efficiency is determined in accordance with CAGI standard ADF500, its calculation basis is 38ºC inlet air temperature.
Product introduction and features
1. Piston filter element is sealed with shell to Prevent unfiltered air from bypassing the filter.
2. Anti-corrosion filter element;
Stainless steel core to enhance structural performance;
Low airflow resistance;
Using seam welding to improve strength.
3. New "matrix hybrid fiber" media
Effective surface area-Improved filter rate-to ensure high efficiency.
The open area is large, minimize the pressure drop.
4.Coated closed foam sleeve
Resistant to oil and acid chemical attacks;
Prevent coalescence liquid from mixing back into the air stream to ensure efficiently.
Anti -chemical corrosion end cover is bonded with special adhesives to the medium
Silicone-free;
withstand 66ºC high temperature.
Five filter elements can be selected for your design to ensure the quality of the air supply system.
C- centrifugal oil-water separator
Suitable for filtering a large volume of liquid and 3 microns -sized condensate(5ppm w/w Maximum residual oil content)
Dual -level filtering
Level 1-Two stainless holes, 10 micron mechanical separation
Level 2-Deep Fiber Medicine Filtering 3 microns of solid and liquid particles
T-Supervisor Filter
Suitable for filtering liquid water and oil;Filter Solid particles as small as 1 micron (1.0ppm w/w Maximum residual oil content)
Internal/outer filter element is anti -corrosion
Dual -level filtering
Level 1-Fiber media and medium filter alternate layer to filter out larger particles
Level 2-Multi-layer epoxy resin adhesive to mixing with fiber media, polycotic mold and filtering solid particles
A-Micro oily mist filter
Suitable for small Gathered Water vapor and oily mist;Filter Solid particles as small as 0.01 micron(0.01ppm w/w Maximum residual oil content)
Internal/outer filter element is anti -corrosion
Dual -level filtering
Level 1-Multi-layer fiber medium and medium filter to Filter removal of larger particles, pre-filtering before the air gas entering the third-level filtration.
Level 2-Multi-layer matrix mixed fiber medium, filter out very fine condensate.
Coated closed foam sleeve.
AA-Ultra -efficient micro oily mist filter
Suitable for the extremely fine water vapor and oil dew; Filter Solid particles as small as 0.01 micron(0.001ppmw/w Maximum residual oil content)
Internal/outer filter element is anti -corrosion
Dual -level filtering
Level 1-Coated closed foam sleeve,Filter and airflow dispersal
Level 2-Multi -layer matrix hybrid fiber media, filter out very small condensate
Coated closed foam sleeve.
H-Removing oil and deodorizing activity carbon filter
Suitable for filtering the activated carbon that can be absorbed by the oil steam and hydrocarbons steam that can be absorbed; Filter Solid particles as small as 0.01 micron(0.003ppm w/w Maximum residual oil content)
Internal/outer filter element is anti -corrosion
Dual -level filtering
Level 1-Extremely fine activated carbon powder stabilized layer, which can be filtered out of most oil steam
Level 2-Multi-layer fiber medium, adhesive micro-active carbon powder, can be filtered to remove residual oil steam
Multi -layer fine medium to prevent pollutants from moving
Coated closed foam sleeve.,Prevent the fibers drifting
Under rated operating conditions, the design life can reach 1000 hours
Product specification:
| Model/Item |
Airflow
(Nm³/min) |
size of interface |
Dimension(mm) |
Filter model |
Filter quantity |
Weight |
| HF-001 |
1.2 |
Rol" |
285x105 |
E(Grade)-16-II |
|
1.22 |
| HF-002 |
2.4 |
Rol" |
328x:105 |
E(Grade)-20-II |
1.33 |
| HF-004 |
3.8 |
Rol" |
350x135 |
E(Grade)-24-II |
2.28 |
| HF-007 |
7 |
Ro1-1/2" |
550x164 |
E(Grade)-32-II |
4.04 |
| HF-010 |
11 |
Ro1-1/2" |
660x164 |
E(Grade)-36-II |
4.62 |
| HF-013 |
14 |
DN50/Ro2" |
979/847360/150 |
E(Grade)-40-II |
46/6.66 |
| HF-018 |
18 |
DN80/Ro2" |
1149/847360/160 |
E(Grade)-44-II |
51/6.92 |
| HF-022 |
22 |
DN80 |
1299x360 |
E(Grade)-48-II |
54 |
| HF-026 |
26 |
DM80 |
1346x20 |
E(Grade)-40-II |
2 |
75 |
| HF-035 |
35 |
DN80 |
1346x20 |
E(Grade)-44-II |
75 |
| HF-045 |
45 |
DN100 |
1356x420 |
E(Grade)-48-I1 |
81 |
| HF-054 |
54 |
DN125 |
1381x520 |
E(Grade)-44-II |
3 |
118 |
| HF-066 |
66 |
DN125 |
1361x520 |
E(Grade)-48-II |
118 |
| HF-088 |
88 |
DN125 |
1452x545 |
E(Grade)-48-II |
4 |
153 |
| HF-110 |
110 |
DN150 |
1503x685 |
E(Grade)-48-II |
5 |
158 |
| HF-132 |
132 |
DN150 |
17392728 |
E(Grade)-48-II |
6 |
162 |
| HF-154 |
154 |
DN200 |
1800r750 |
E(Grade)-48-II |
7 |
273 |
| HF-200 |
200 |
DM200 |
1800x750 |
E(Grade)-48-II |
9 |
300 |
| HF-220 |
225 |
DN200 |
1800x750 |
E(Grade)-48-II |
10 |
310 |
| HF-250 |
250 |
DM250 |
1920x1000 |
E(Grade)-44-II |
14 |
370 |
Working conditions and technical indicators:
Maximum work pressure of aluminum shell filter1.6Mpa
14 Cube Frank filter maximum work pressure1.0Mpa
maximum operating temperature is66ºC
){kind=link}
){kind=link}