Adsorption Dryer

• After-sales Service: Online
• Flow: Parallel Flow
• Material Status: Bulk
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BLS-AD
• Drying Medium: Air
• Structure: Enclosed
• Operation Pressure: Atmospheric Pressure
• Inlet Temperature: Normal Temperature
• Cooling Way: Air Cooling
• Type: Medium
• Transport Package: Export Standard Packing
• Specification: 3520x 2630x 3247
• Origin: China
• HS Code: 7608000
• Production Capacity: 300PCS Per Month
• Package Size: 352.00cm * 263.00cm * 324.00cm
• Package Gross Weight: 8450.000kg

Product Description

GXF Series Blast Adsorption Dryer


Production

Adopt PLC control
The PLC controller (patented product) independently developed by our company is adopted to make the equipment run more stably, with higher reliability and stronger anti-interference ability.


Operating principle

Adsorption drying process: The compressed air with moisture flows through the adsorption tower equipped with high-performance adsorbent, and the moisture in the compressed air is absorbed and dried by the adsorbent and flows to the gas terminal for use at the gas point.
Regeneration process: This series of dryers use a high-pressure blower to blow ambient air (as regeneration airflow) into the heating cylinder of the heater, and flow through the adsorbent to be desorbed. Under the principle of adsorbent desorption at high temperature, the water is taken out of the adsorption cylinder and discharged to the atmosphere.



Advantage

The amount of regeneration gas is small. The air blown from the outside air by the high-pressure blower is used as the regeneration gas, and only 1% of the dried compressed air is used for cooling, and the air consumption is 1/15 of that of the heatless regeneration adsorption dryer, and that of 1/6 of the regeneration dryer. Adopt high-pressure blower with high reliability, long life and low noise. High-performance PLC is used as the control host, which has strong anti-interference ability to ensure stable operation of the equipment, and can monitor the running status of the equipment locally or remotely (communication interfaces can be provided for customers).


Working conditions and technical indicators

Regeneration gas volume: ≤1%
Working pressure: 0.6~1.0Mpa
Intake oil content: ≤0.1mg/m3
Pressure dew point: -20ºC~-40ºC
Standard work cycle: 8 hours
Intake temperature: 0ºC~45ºC

Item/   Model	Flow (Nm³/min)	Blower Power (KW)	Heater Power (KW)	Air nozzle size	Dimensions   (mm)	Weight (Kg)	Power Supply (V/Hz)
HAD-15GXF	17	1.3	11	DN80	1440x1267x2370	1611	380/50
HAD-20GXF	23	2.2	15	DN80	1827x1410x2579	1765	380/50
HAD-25GXF	27	2.2	17	DN80	1653x1325x2560	1864	380/50
HAD-30GXF	33	5.5	22	DN80	1830x1423x2639	2300	380/50
HAD-40GXF	45	5.5	29	DN100	2076x1577x2685	2890	380/50
HAD-50GXF	55	5.5	33	DN125	2140x1595x2733	3014	380/50
HAD-60GXF	65	9	42	DN125	2500x1713x2744	3781	380/50
HAD-80GXF	85	9	53	DN125	2500x1830x2761	4040	380/50
HAD-100GXF	100	15	66	DN150	2680x2100x3112	4747	380/50
HAD-120GXF	120	15	79	DN150	3080x2070x3183	5815	380/50

HYR Series Waste Heat Suction Machine

Introduction

The HYR series waste heat suction dryer uses the waste heat of the oil-free air compressor to heat and regenerate the adsorbent, making full use of the waste heat in the compressed air system. Without a heating device, the effect of a heated suction dryer can also be achieved, fully demonstrating the energy-saving and high-efficiency characteristics, and the dew point of the finished gas can reach -40 °C. Using the independent patented PLC controller, the performance is more stable and reliable than that of single chip. The control valve adopts high-quality butterfly valve to ensure more than 1 million times of trouble-free switching. The advanced diverter design enables the compressed air to contact the adsorbent evenly, completely eliminating the channeling phenomenon.


Working conditions and technical indicators
Power supply: 220V/50HZ
Cooling water pressure: 0.2~0.4MPa
Working pressure: 0.6~1.0MPa
Cooling water temperature: ≤32ºC
Pressure loss: ≤0.04MPa
Pressure dew point: -20ºC~-40ºC
Air inlet temperature: 110ºC~140ºC
Regeneration gas volume: ≤1%

Item/Model	Air flow (Nm³/min)	Cooling water circulation Nm³/h	Air nozzle diameter	Dimensions(mm)	Weight (Kg)
HAD-40HYR	45	15	DN100	2100x 2494x2691	3270
HAD-50HYR	55	18	DN125	2000x 2500x2825	3700
HAD-60HYR	65	22	DN125	2200x 2600x2855	4300
HAD-80HYR	85	30	DN125	2200x 2750x2831	4970
HAD-100HYR	100	36	DN150	2300x 3590x2935	5870
HAD-120HYR	120	42	DN150	3650x 2680x2972	6950
HAD-150HYR	150	50	DN200	3520x 2630x 3247	8450
HAD-200HYR	200	58	DN200	4120x 2830x 3600	10625
HAD-250HYR	250	74	DN250	4220x 3067x 3643	14200
HAD-300HYR	300	88	DN250	4200x4238x 3578	17850
HAD-350HYR	350	102	DN300	4600x4350x 3600	19800
HAD-400HYR	400	120	DN300	5030x4543x 3633	22000
HAD-500HYR	500	160	DN400	4330x4950x3780	28500