2 Bar 3 Bar 4 Bar 5 Bar Low-Pressure Water-Injection Oil-Free Single Screw Type Air Compressors with Permanent Magnet Motor

• After-sales Service: Online
• Warranty: 3000hours
• Lubrication Style: Lubricated
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BLS-SAC
• Cooling System: Air Cooling
• Power Source: AC Power
• Cylinder Position: Horizontal
• Structure Type: Closed Type
• Installation Type: Stationary Type
• Type: Twin-Screw Compressor
• Transport Package: Export Standard Packing
• Specification: 4120*1900*2000mm
• Origin: China
• HS Code: 84148090
• Production Capacity: 3000sets Per Month
• Package Size: 412.00cm * 190.00cm * 200.00cm
• Package Gross Weight: 650.000kg

Product Description

LG-II series two-stage air compressor

Product Description

Main Machine:

1. Adopt two-stage compression main engine, large rotor and low speed.
2. The upper and lower integrated design concept combines the first-stage compression rotor and the second-stage compression rotor in one casing to achieve the highest compression transfer efficiency.

      3. The compression ratio of each stage is small, the leakage is smaller, and the volume utilization rate is high. The bearing is less stressed and has a long service life.



Intake system:
Vertical straight-through air intake structure minimizes pressure loss, special air inlet sealing material ensures long service life, no wearing parts, reliable performance and long service life.

Piping system:
The pipeline system adopts the American standard pipeline design. Due to the large inner diameter of the transport pipe and the small flow resistance, the hard pipe usually has a higher transport rate than the hose, and is stable, long service life, and maintenance-free for life.

Permanent magnet motor:
The variable frequency permanent magnet motor has the characteristics of high efficiency, high power factor, wide high efficiency interval, stable speed, zero slip, and energy saving. Therefore, the permanent magnet frequency conversion equipment under the two-stage screw compressor can be more energy saving.

Controller:

1. Adopt advanced microcomputer control to achieve intelligent operation and humanized operation, and the operation status is clear at a glance.

2. Equipped with advanced intelligent control system, various parameters such as pressure and temperature are continuously monitored, controlled and displayed according to preset values.
3. It has the function of automatic fault alarm and protection, and stores historical operation records in time.

Product Feature
Energy saving analysis

1. The compression ratio of each stage is much smaller than the compression ratio of the common main engine of the same power, and by oil injection cooling, the temperature of the secondary intake air is reduced, and the compression work is greatly reduced.
2. The low pressure ratio greatly reduces the backflow leakage between the rotors, and greatly improves the volumetric efficiency and adiabatic efficiency, which is ultimately reflected in the increase in the compressed gas production.
3. Two-stage compression is better than single-stage at the same power.

Specification

Mode		L022A-11	L030A-11	L037A-11
Machine Set	Exhaust volume (m³/min)	4.2	6.2	7.2
	Exhaust pressure (MPa)	0.8	0.8	0.8
	Compression level	2	2	2
	Motor power(kw)	22	30	37
	Motor speed(rpm)	1480	1480	1480
	Energy efficiency rating	Grade I	Grade I	Grade I
	Start method	soft start	soft start	soft start
	Transmission mode	direct connection	direct connection	direct connection
	Connection size	G1-1/2"	G1-1/2"	G1-1/2"
	Cooling method	air cooling	air cooling	air cooling
	Length(mm)	1785	1785	1785
	Width(mm)	1107	1107	1107
	Height(mm)	1432	1432	1432
	Machine weight(kg)	1200	1300	1350

 

Mode		L045A-11	L055A-11	L075A-11
Machine Set	Discharge volume(m3/min)	10.5	12.55	15.5
	Discharge pressure (MPa)	0.8	0.8	0.8
	Compression level	2	2	2
	Motor power(kw)	45	55	75
	Motor speed(rpm)	1480	1480	1480
	Energy efficiency rating	Grade I	Grade I	Grade I
	Start method	soft start	soft start	soft start
	Transmission mode	direct connection	direct connection	direct connection
	Connection size	G1-1/2"	G2"	G2"
	Cooling method	air cooling	air cooling	air cooling
	Length(mm)	1785	2180	2180
	Width(mm)	1107	1350	1350
	Height(mm)	1432	1600	1600
	Machine weight(kg)	1850	2000	2150

 










FAQ

Q1: What's your delivery time?
A: 15 days to produce, within 3 days if in stock.
 
Q2: What's methods of payments are accepted?
A: We agree T/T ,L/C , West Union ,Money Gram ,Paypal.
 
Q3: What about the shipments and package?
A: 40' container for 2 sets, 20' container for 1 set, 
Machine in nude packing, spare parts in standard export wooden box.
 
Q4: Have you got any certificate?
A:We have got ISO,CE certificate.
 
Q5: How to control the quality?
A: We will control the quality by ISO and CE requests.
 
Q6: Do you have after-sale service and warranty service ?
A: Yes, we have.We can supply instruction for operation and maintenance.If necessary, we can send our engineer to repair the machine in your company.
Warranty is one year for the machine.
 
Q7: Can I trust your company ?
 A: Our company has been certificated by Chinese government,and verified by SGS Inspection Company.